www.elektron-bulgin.com PX0596 px0598 6.3mm or 4.8mm tabs 16a, 250v a.c. (20a, 250v a.c. ul and csa) fits panel sizes 1, 1.5, 2.0 or 3.0mm 6.3mm or 4.8mm tabs 16a, 250v a.c. (20a, 250v a.c. ul and csa) c20 flange mount inlet c20 snap fit to panel inlet en60 320-1 standard sheet c19 class i & standard sheet c20 class i cold condition px0599 rewirable screw terminals 16a, 250v a.c. (20a, 250v a.c. ul and csa) wire sizes (max); 3 x 2.5mm 2 , 3 x 12awg overall cable diameter up to 12mm c19 straight female cable connector specification px0599 PX0596/termination px0598/panel/termination fixing (panel): - flange snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) terminations: screw terminals /63 (6.3mm tab), /48 (4.8mm tab) /63 (6.3mm tab), /48 (4.8mm tab) max. rating: 16a, 250v ac 16a, 250v ac 16a, 250v ac 20a, 250v ac ul and csa 20a, 250v ac ul and csa 20a, 250v ac ul and csa insulation resistance: >5m? >10 6 m ? >10 6 m ? dielectric strength between contacts: 1.5kv ac 1.5kv ac 1.5kv ac between contacts & accessible surfaces: 3kv ac 3kv ac 3kv ac operating temp. range: C40oc to +70oc C40oc to +70oc C40oc to +70oc max. pin temp.: - 70oc 70oc withdrawal force: 15n min, 60n max. -- mouldings: nylon, flammability rating ul94v-0 nylon, flammability rating ul94v-0 nylon, flammability rating ul 94v-0 contacts: brass, clean pins: brass, nickel plated pins: brass, nickel plated tabs: brass, tin plated tabs: brass, tin plated approvals: mating connectors: c20 inlets; PX0596 flange and px0599 rewirable connector px0599 rewirable connector px0598 snapfit accessories: kt0012, p.no. 14064 p.no. 14064 (see page 97) (see pages 95 & 97) compliant compliant compliant 93 iec connectors iec connectors iec connectors conns2 - in-outlets 2010:conns2 - in/outlets 2005v2 8/6/10 16:45 page 93
|
